C 2500 Suburban 2WD V8-6.0L VIN U (2002)
2. Install the outlet heater hose to the water pump.
3. Install the outlet heater hose to the surge tank.
4. Install the outlet heater hose clamp to the surge tank.
5. Connect the heater and surge tank hoses to the heater core.
Firmly push the quick connect onto the heater core hose until you hear an audible click.
6. Install the heater and surge tank hoses to the mounting clip.
7. Install the air intake tube.
8. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
