C 2500 Suburban 2WD V8-6.0L VIN U (2002)
8. Install the PCV hose to the throttle body and rocker cover.
9. Apply threadlock GM P/N 12345382, Canada PIN 10953489, or equivalent to the threads of the bracket bolts.
10. Install the ignition coils and bracket to the rocker arm cover.
11. Install the ignition coil bracket studs to the rocker cover.
-
Tighten the studs to 12 Nm (106 inch lbs.).
12. If equipped with the 4.8L, 5.3L, or 6.0L (LQ4) engine, perform the following:
12.1. Install the heater hose bracket and nut.
-
Tighten the nut to 9 Nm (80 inch lbs.).
12.2. Position the surge tank/heater hoses to the heater hose bracket.
13. Install the spark plug wires to the ignition coils.
14. Position the engine harness, if necessary.
