C 2500 Suburban 2WD V8-6.0L VIN U (2002)
Ensure the seal is on the stud.
4. Use the J29193 in order to seat the tapers.
Tighten
Tighten the J29193 or the J29194 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
5. Install the new idler arm ball stud prevailing torque nut to the idler arm ball stud.
Tighten
Tighten the nut to 62 Nm (46 ft. lbs.).
6. Install the engine protection shield, if equipped.
7. Lower the vehicle.
8. Check the wheel alignment.
