C 2500 Suburban 2WD V8-6.0L VIN U (2002)
Power Steering Fluid Cooler: Service and Repair
With Hydroboost
Power Steering Cooler Pipe/Hose Replacement (With Hydroboost)
Removal Procedure
1. Remove the front grille.
Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
2. Place a drain pan under the vehicle.
3. Siphon the fluid from the reservoir to prevent excess spillage.
4. Remove the clamp retaining the power steering cooler inlet hose (3) to the power steering gear (2).
5. Remove the clamp retaining power steering cooler outlet hose (5) to the power steering pump (1).
6. Remove the bolts (2) retaining the power steering cooler from the radiator support.
7. Remove the power steering cooler from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.