C 2500 Suburban 2WD V8-8.1L VIN G (2001)
4. Align the retainers with the holes in the door.
5. Install the trim panel to the door by carefully applying pressure in order to seat the retainers.
6. Install the window regulator handle, as necessary.
7. Install the power accessory switch mounting panel, as necessary.
Notice: Refer to Fastener Notice in Service Precautions.
8. Install the trim panel armrest screw.
Tighten the trim panel armrest screw to 2 N.m (18 lb in).
9. Insert the screw cover.
10. Install the trim panel upper extension.
11. Install the door handle bezel.
Trim Panel Replacement - Upper Extension
REMOVAL PROCEDURE
1. Open the front door.
2. Release the upper extension by pulling outward in order to release the upper retainer clip.
3. Remove the upper extension from the trim panel by lifting up and out.
INSTALLATION PROCEDURE