C 2500 Suburban 2WD V8-8.1L VIN G (2001)
Sun Visor: Service and Repair
Sunshade Replacement
Removal Procedure
1. Remove the screws that retain the sunshade to the roof.
2. Disconnect the electrical connector, if equipped.
3. Remove the sunshade from the vehicle.
Installation Procedure
1. Connect the electrical connector, if equipped.
2. Install the sunshade.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the screws.
Tighten the screws to 6 N.m (53 lb in).