C 2500 Suburban 2WD V8-8.1L VIN G (2001)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement (Left)
Valve Rocker Arm Cover Replacement - Left
Removal Procedure
1. Remove the engine sight shield.
2. Remove the secondary air injection (AIR) pipe nut at the fuel rail, if equipped.
3. Remove the AIR pipe bolts at the exhaust manifold, if equipped.
4. Disconnect the AIR pipe from the AIR pump pipe, if equipped.
5. Remove the AIR pipe, if equipped.
6. Remove and discard the AIR pipe gasket, if equipped.
7. Remove the Connector Position Assurance (CPA) retainer from the ignition coil electrical connector (3).
8. Disconnect the ignition coil harness electrical connector (3).