C 2500 Suburban 2WD V8-8.1L VIN G (2001)
1. Connect the electrical connector to the steering wheel control switch.
2. Install the steering wheel control switch to the steering wheel.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the steering wheel control switch mounting screws.
Tighten
Tighten the mounting screws to 2 N.m (20 lb in).
4. Install the horn switch plunger.
5. Install the steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Restraint Systems.