C 2500 Suburban 2WD V8-8.1L VIN G (2001)
Fluid Line/Hose: Service and Repair
Allison - Automatic Transmission
Automatic Transmission Oil Cooler Fitting Replacement
Automatic Transmission Oil Cooler Fitting Replacement
Removal Procedure
1. Disconnect the hose from the hydraulic connector assembly being replaced.
2. Remove the hydraulic connector assembly (1) and/or (2).
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install a new hydraulic connector assembly (1) and/or (2)
^
Tighten to 25 Nm (18 ft. lbs.).
2. Connect the hose to the hydraulic connector(s).
Oil Cooler Line Replacement
Oil Cooler Line Replacement
Removal Procedure