C 2500 Suburban 2WD V8-8.1L VIN G (2001)
2. Install the bolts (1) that retain the transmission mount to the transmission (2WD), or transfer case adapter (4WD).
^
For vehicles equipped with 4WD, tighten the bolts to 47 Nm (35 ft. lbs.).
^
For vehicles equipped with 2WD, tighten the bolts to 50 Nm (37 ft. lbs.).
3. Lower the transmission and install the two nuts securing the transmission mount to the transmission support.
^
Tighten the nuts to 40 Nm (30 ft. lbs.).
4. Remove the transmission jack.
5. Lower the vehicle.