C 2500 Truck 2WD V6-262 4.3L VIN Z (1992)
-
Place drain pan under transmission oil pan
3. Oil pan bolts from the front and sides
4. Remaining oil pan bolts, oil pan, and gasket
5. Oil filter and O-ring
6. Valve body bolts
-
Manual control valve link from range selector inner lever
-
Throttle lever bracket from TV link
-
Spacer plate and check balls
Clean:
-
Oil pan and case of gasket material
-
Valve body components
Install or Connect:
1. Valve body, spacer, check balls, and bolts
2. New O-ring seal and oil filter
-
Coat O-ring seal with "TRANSJEL J 36850 or equivalent
3. New Gasket, oil pan and bolts. Tighten bolts to 11 Nm (97 in lbs).
4. Lower vehicle
5. Connect negative battery cable
6. Fill transmission with DEXRON-IIE automatic transmission fluid and inspect for leaks