chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall - Automatic Transmission Vent|Page 4064 > < Recall - Automatic Transmission Vent|Page 4062
Page 3
background image

steps necessary to be sure the campaign correction has been made before selling or releasing the vehicle.

PARTS INFORMATION

NOTICE

EACH DEALER WILL BE PRESHIPPED ONE (1) CARTON (50 PIECES) OF TRANSMISSION VENT HOSES AND ONE (1) CARTON (50
PIECES) OF TIE STRAPS ON OR ABOUT MARCH 12, 1993.

Parts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). To ensure these parts will be
obtained as soon as possible, they should be ordered from GMSPO on a "C.I.O." order with no special instruction code, but on an advise code (2).

Quantity/

Part Number

Description

Vehicle

15960319

Transmission vent Hose

1 Hose

(IMPORTANT NOTICE:
SHIPPED IN MERCHANDIZING PACKAGE OF 50 PIECES)

11501906

Tie Strap

1 Tie Strap

(IMPORTANT NOTICE:
SHIPPED IN MERCHANDIZING PACKAGE OF 50 PIECES)

Service Procedure

1.

Inspect vehicle for lock-seal dipstick (Figure 1) as installed in campaign 90C35, dated January, 1992. If this lock-seal dipstick is not present, it
should be obtained through GMSPO and campaign 90C35 completed.

2.

Raise vehicle on hoist.

Recall - Automatic Transmission Vent|Page 4064 > < Recall - Automatic Transmission Vent|Page 4062