C 2500 Truck 2WD V8-305 5.0L VIN H TBI (1995)
b. The crankcase ventilation pipe.
c. The generator rear brace.
5. Install the components as follows for the right valve rocker arm cover:
a. Emission sensors with bracket, and move aside.
b. The heat stove pipe.
c. The oil level indicator tube bracket.
d. The PCV valve.
6. Install the wiring harnesses to the valve rocker arm cover clips.
7. Crankcase ventilation hose.
8. Connect the battery negative cable assembly to the battery negative terminal.
^
Tighten the bolt to 15 Nm (11 ft. lbs.).
