C 2500 Truck 2WD V8-5.7L VIN R (1997)
Keyless Entry Transmitter Battery: Service and Repair
Opening Transmitter Case
Transmitter Battery Replacement
Under normal use, the battery in the transmitter should last about two years. For battery replacement, use a Panasonic® 3 volt, type CR2032, or
equivalent.
REMOVE OR DISCONNECT
1. Open the transmitter case.
^
Insert a dime between the two halves of the transmitter near the key ring hole and twist.
2. Battery.
INSTALL OR CONNECT
1. Battery.
^
Install the battery with the (+) positive side down.
2. Close transmitter case.
^
Align and snap together the top and bottom covers.
^
Check the operation of the transmitter.
