C 2500 Truck 2WD V8-5.7L VIN R (1997)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Tube Adapters
Tube Adapters
Remove or Disconnect
1. Disconnect appropriate brake line from tube adapters.
2. Tube adapter.
Install or Connect
1. Tube adapter.
^
Tighten Tube adapter to 31 Nm (23 ft. lbs.)
2. Brake line.
3. Bleed the system. Refer to Antilock Brake System Service and Repair.
NOTE: If more than one tube adapter is to be removed at one time, the Brake Pressure Modulator Valve (BPMV) should be stamped with a number (1,
2, or 3) to correspond with the number of grooves cut into the tube adapters. This will aid in proper reassembly.
