C 2500 Truck 2WD V8-5.7L VIN R (1997)
Brake Caliper: Service and Repair
Servicing Information
SERVICING INFORMATION
^
Replace all components included in the repair kits.
^
Lubricate the parts as specified.
^
Do not use lubricated shop air on brake parts. Rubber component damage may result.
^
After any hydraulic component has been removed or disconnected, if necessary, bleed all or part of the brake system.
^
Replace shoes and linings in axle sets only.
^
The torques specified are for dry, unlubricated fasteners.
^
Perform service operations on a clean bench free from mineral oil and any other contaminants.
^
Use extreme care when doing any work around the antilock components to prevent damage or misalignment.
^
Before moving the vehicle after a repair, pump the brake pedal several times to make sure it is firm. Do not move the vehicle until a firm pedal has
been obtained. Check the brake fluid level in the master cylinder after pumping the brakes.
