chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Customer Safety Information|Page 9352 > < Customer Safety Information
Page 1
background image

Hydraulic Brake Booster: Technician Safety Information

CAUTION:

^

The accumulator contains compressed gas. Always use the proper tools and follow the recommended procedures, or personal injury may result. Do
not attempt to repair an inoperative accumulator. Always replace an inoperative accumulator with a new one. Dispose of an inoperative
accumulator by drilling a 1/16 inch diameter hole through the end of the accumulator can, opposite the O-ring.

^

Push rod removal is not recommended. Improper staking of the push rod to the Hydroboost reaction piston can result in a loss of brakes. If the rod
or seals require service, the entire unit must be replaced.

Customer Safety Information|Page 9352 > < Customer Safety Information