C 2500 Truck 2WD V8-5.7L VIN R (1997)
-
Install the seven screws that hold the cover plate to the module assembly.
5. Module assembly (57).
-
May be necessary to have an assistant when installing module assembly.
6. Screw (56).
7. Nut (50).
8. Screws (52 and 64).
Tighten
^
Screw (56) to 11 Nm (97 lb in).
^
Nut (50) to 2.8 Nm (25 lb in).
^
Screws (52 and 64) to 1.9 Nm (17 lb in).
9. Accumulator.
10. Evaporator tube.
11. Heater hoses.
12. Coolant recovery reservoir.
13. Instrument panel.
14. Steering column.
15. Blower motor (60).
16. Blower motor cover.
17. Hinge pillar trim panels.
18. ECM and mounting tray.
19. Center floor air distribution duct.
20. Electrical connectors, as necessary.
21. Engine coolant.
22. Negative battery cable.
23. Charge system.
24. Check system for leaks.
