C 2500 Truck 2WD V8-5.7L VIN R (1997)
2. Gently remove your hands and let the vehicle settle on its own.
3. Repeat this operation twice more for a total of three times.
4. Measure the "D" dimension.
5. Push the rear bumper of the vehicle down about 38 mm (1.5 inches).
6. Gently remove your hands and let the vehicle rise on its own.
7. Repeat the operation twice more for a total of three times.
8. Measure the "D" dimension.
9. Find the average of the high and low measurements. This is the true "D" dimension.
10. Measure the front alignment angles.
-
Install alignment equipment according to the manufacturer's instructions.
-
Measure alignment angles and record the readings. If adjustments are required, make them in the following order: caster, camber, and toe-in.
