C 2500 Truck 2WD V8-5.7L VIN R (1997)
Air Bag Control Module: Service and Repair
Frontal SIR System Install or Connect
Install or Connect
1. The Sensing and Diagnostic Module (SDM) to the vehicle, making sure the arrow is pointing toward the front of the vehicle.
2. the SDM fasteners.
Tighten
^
Fasteners to 12 N.m (106 lb in).
3. The electrical connector and the CPA.
4. Position the carpet over SDM.
5. Sill trim molding LH.
6. 6 The driver seat.
Enable the SIR system, refer to Air Bag(s) Arming and Disarming.
Tighten
^
Fasteners to 12 N.m (106 lb in).
