C 2500 Truck 2WD V8-5.7L VIN R (1997)
Fuse Block: Service and Repair
Instrument Panel Fuse Block Replacement
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Fuse block cover. The cover is on the left end of the instrument panel.
3. Fuse block.
A. Screw at bottom of fuse block.
B. Push fuse block in at the bottom. it will pivot clear of two mounting tabs at the top of the fuse block. Push the fuse block back and away from
the instrument panel.
C. Mark the fuse block and the wire locations for reassembly.
4. Wires from the fuse block.
5. Fuse block from the vehicle.
6. Fuses from the block.
INSTALL OR CONNECT
1. Fuses to the block.
2. Fuse block to the vehicle.
3. Wires to the fuse block in their original locations.
4. Fuse block to the instrument panel.
A. Place the two tabs at the top of the fuse block onto the tabs of the instrument panel.
B. Push the bottom of the fuse block into place from behind the block. Align the screw hole and insert the retaining screw.
5. Fuse block cover to the instrument panel.
6. Negative battery cable.
