C 2500 Truck 2WD V8-5.7L VIN R (1997)
Seals and Gaskets: Service and Repair
New Venture Gear NV3500 Manual Transmission
-
Tools Required:
-
J 36503 Extension Housing Seal installer
-
J 23907 Universal Slide Hammer
-
J 26941 Output Shaft Seal Remover
REMOVE OR DISCONNECT
1. Raise and support the vehicle.
2. Transmission oil.
3. Propeller shaft.
4. Extension oil seal using J 23907 and J 26941.
INSTALL OR CONNECT
1. New extension oil seal, using J 36503.
-
Apply a thin coat of chassis grease between the seal lips.
2. Propeller shaft.
3. Transmission oil.
4. Lower the vehicle.