C 2500 Truck 2WD V8-5.7L VIN R (1997)
1. Wiper blade assembly by pressing the pin of the wiper arm assembly into the blade retainer until the pin is engaged.
Wiper Blade Element Replacement
REMOVE OR DISCONNECT
1. Wiper blade element by squeezing the element retainer tabs together, then pull the blade element out.
INSTALL OR CONNECT
1. Insert the blade element until its retainer is engaged by the outer claw set.
IMPORTANT
^
Make sure the blade element is secure in all claw sets.
2. Check the wipe pattern and compare it to image.
