C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
1. Install the seat back frame (6) to the seat back cushion frame (7).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts to retain the seat back frame to the seat cushion frame.
Tighten the bolts to retain the seat back frame to the seat cushion frame to 35 N.m (26 lb ft).
3. Secure the access flaps at the lower rear corners of the seat back.
4. Secure the armrest to the seat back. Refer to Rear Seat Armrest Replacement (60/40 - 50/50 Split).
5. Install the seat to the vehicle.
Driver Seat Recliner Handle and Passenger Seat Recliner Handle Replacement
Driver Seat Recliner Handle and Passenger Seat Recliner Handle Replacement
Removal Procedure
1. Remove the screw retaining the recliner handle to the trim panel.
2. Remove the recliner handle.
Installation Procedure
1. Position the recliner handle on the side shield.
Notice: Refer to Fastener Notice.
