C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Crankshaft: Specifications
Material
Forged Steel
Heat Treatment
Nitrided
Main Journal Diameters
3.15 in
Crankpin Diameter
2.48 in
Harmonic Balancer
Rubber Damper
Flywheel Material
Cast Iron
Main Bearing Type
Steel Backed Pb-Sn-Cu Overlay
Number of Bearings
5
End Thrust Taken By
Crank Thrust Bearing
Total Bearing Length
4.07 in
Total Projected Area
20.16 inch 2
Crankshaft End Play - Service Limits
0.0213 in
Crankshaft End Play - Production Value
0.0016-0.0081 in
Crankshaft Journal Diameter (Main) - Service Limits
3.1453 in
Crankshaft Journal Diameter (Main) - Production Value
3.1459-3.1466 in
Crankshaft Runout - Service Limits
0.0173 in
Crankshaft Runout - Production Value
0.0020 in
Crankpin Diameter - Service Limits
2.4756 in
Crankpin Diameter - Production Value
2.4764-2.4772 in
Rear Oil Seal Distance from Crankshaft End - Production Value
1.1299-1.1535 in
Front Oil Seal distance from Crankshaft End - Production Value
1.7106-1.7342 in
