C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the crankshaft balancer bolt.
^
Tighten the bolt with plain washer to 363 Nm (278 ft. lbs.).
5. Raise the vehicle.
6. Remove the J 44643.
7. Install the starter motor and bolts.
^
Tighten the starter motor bolts to 78 Nm (58 ft. lbs.).
8. Install the right front fender wheelhouse panel (1).
9. Lower the vehicle.
10. Install the upper and lower fan shroud.
11. Connect the battery negative cables.