C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
17. Install the charged air cooler inlet duct to the turbocharger.
18. Align the duct to the turbocharger as shown.
19. Position the hose clamps.
^
Tighten the charged air cooler inlet duct clamps to 6 Nm (53 ft. lbs.).
20. Install the upper intake manifold sight shield.
^
Tighten the upper intake manifold shield bolt to 9 Nm (80 inch lbs.).
