C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Drive Belt Tensioner: Service and Repair
Drive Belt Tensioner and Generator Mounting Bracket Replacement
Drive Belt Tensioner and Generator Mounting Bracket Replacement
Removal Procedure
1. Disconnect both battery negative battery cables.
2. Remove the drive belt.
3. Remove the upper fan shroud.
4. Remove the bolt (2) for the outlet heater hose bracket.
5. Remove the generator mounting bolts.
6. Remove the generator and move aside. The wiring harness can remain on the generator.
7. Remove the right idler pulley (ribbed) retaining bolt.
8. Remove the right idler pulley.