C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
8. Install the 3 bolts holding the engine mount to the engine mount frame bracket.
^
Tighten the engine mount to engine mount frame bracket bolts to 65 Nm (50 ft. lbs.).
9. If RWD vehicle with an automatic transmission, install the bolt for the transmission oil cooler line bracket.
^
Tighten the transmission oil cooler line bracket bolt to 9 Nm (80 inch lbs.).
10. Install the engine protection shield and bolts.
^
Tighten the engine protection shield bolts to 20 Nm (15 ft. lbs.).
