C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the right side idler pulley assembly with the bolt.
^
Tighten the idler pulley bolt to 43 Nm (32 ft. lbs.).
2. Install the center idler pulley assembly with the bolt.
^
Tighten the idler pulley bolt to 43 Nm (32 ft. lbs.).
3. If equipped with dual generators, install the left side idler pulley assembly with the bolt.
^
Tighten the idler pulley bolt to 43 Nm (32 ft. lbs.).
4. Install the drive belt.