C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
8. Install a new seal in the coolant duct to the engine flywheel housing.
9. Install a new gasket for the coolant duct to the oil filter adapter and oil cooler assembly.
10. Install the 2 nuts for the coolant duct to engine flywheel housing.
11. Install the 2 bolts for the coolant duct to oil filter adapter assembly.
^
Tighten the coolant duct bolts to 21 Nm (15 ft. lbs.).
^
Tighten the coolant duct nuts to 21 Nm (15 ft. lbs.).
12. Install the engine wiring harness retainer on the water pump outlet pipe to water pump inner stud.
13. Install the water pump outlet pipe nuts.
^
Tighten the water pump outlet pipe nuts to 25 Nm (18 ft. lbs.).
14. Install the oil filter.
^
Tighten the oil filter to contact plus 1 to 1-1/4 turn.