C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
4. Install the exhaust manifold heat shield.
5. Install the exhaust manifold heat shield bolts.
^
Tighten the exhaust manifold heat shield bolts to 8 Nm (71 inch lbs.).
6. Install the exhaust pipe gasket. Align the tab on the gasket to face outward as shown.
7. Install the exhaust pipe and the bolts (2) to the exhaust manifold.
^
Tighten the exhaust pipe to manifold bolts to 53 Nm (39 ft. lbs.).
8. Raise the vehicle.
9. Install the exhaust pipe heat shield bolts.
^
Tighten the exhaust pipe heat shield bolts to 8 Nm (71 inch lbs.),
