C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
5. If equipped with a 4.3L, 4.8L, or 5.3L engine, perform the following:
^
Unclip the oxygen sensor electrical connector from the hose clip.
^
Disconnect the CPA retainer.
^
Disconnect the oxygen sensor electrical connector (1).
6. If equipped with a 6.0L or 8.1L engine, perform the following:
^
Disconnect the CPA retainer.
^
Disconnect the oxygen sensor electrical connector.
7. Support the catalytic converter or exhaust manifold pipe with adjustable jackstands.
8. If equipped with a 4.3L, 4.8L, or 5.3L engine, remove the left exhaust manifold pipe nuts.
