C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Power Steering Pump: Service and Repair
Pulley Removal and Installation
Power Steering Pulley Replacement
-
Tools Required
-
J 25034-C Power Steering Pump Pulley Remover
-
J 25033-C Power Steering Pump Pulley Installer
Removal Procedure
1. Remove the upper fan shroud. Refer to Fan Shroud Replacement - Upper in Cooling Systems.
2. Remove the drive belt. Refer to Drive Belt Replacement in Engine.
3. Remove the power steering pump pulley using the J 25034-C.
Installation Procedure
1. Place the power steering pump pulley on the end of the power steering pump shaft.
2. Install the power steering pump pulley using J 25033-C.