C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Band Apply Servo: Service and Repair
4L60-E - Automatic Transmission
2-4 Servo
Removal Procedure
^
Tools Required
-
J 29714-A Servo Cover Depressor
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the exhaust pipe assembly.
3. Remove the heat shield.
4. Install the J29714-A.
5. Tighten the bolt in order to compress the servo cover.
6. Remove the servo cover retaining ring.
