C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
1. Clean the flywheel assembly.
2. Inspect the flywheel assembly for cracks or excessive wear on the teeth.
3. Replace the flywheel assembly if any concerns exist.
Installation Procedure
Caution: When removing or installing the flywheel wear protective gloves. The teeth on the ring gear may be very sharp and may cut you.
1. Install the flywheel to the crankshaft.
2. Install the flywheel washer to the flywheel.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install NEW flywheel bolts.
4. Install the J 44643 to lock the flywheel.