C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Fluid - M/T: Service and Repair
NV 3500
Fluid Replacement
^
Tools Required
-
J 36511 Oil Fill/Drain Plug Hex Bit (117 MM)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Using J 36511 remove the oil fill and drain plugs. Drain the oil in a suitable container.
Installation Procedure
1. Apply sealant to the oil drain plug threads. Use sealant GM P/N 12346004 or the equivalent.
Notice: Refer to Fastener Notice in Service Precautions.
2. Using J36511 install the oil drain plug.
^
Tighten the oil drain plug to 30 Nm (22 ft. lbs.).