C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
12. Repeat steps 8-11 on the remaining stud locations.
13. Remove each service nut.
14. Apply a full-bodied caulk to the entire hinge mounting surface in order to ensure a proper seal.
15. Install the hinge (2) to the pillar (3). Use the supplied nuts (1).
16. Clean and prepare all of the surfaces as necessary for refinishing.
17. Apply the sealers. Refinish the surfaces as necessary.
Notice: Refer to Fastener Notice in Service Precautions.
18. Install and align all of the related panels and the components.
Tighten the hinge nuts (4) to 25 N.m (18 lb ft).
