C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
10. Align the service hinge (2) to the door (3) and install the fasteners (1).
11. Apply the sealers.
12. Refinish the metal surfaces as necessary.
Notice: Refer to Fastener Notice in Service Precautions.
13. Install the door and align all of the related panels and the components.
Tighten the bolts to 25 N.m (18 lb ft).
Hinge Replacement
REMOVAL PROCEDURE
1. Remove the door from the body.
2. Remove the excess sealer surrounding the hinge.
3. Scribe the location of the existing hinges on the body pillar and the door.
4. Center punch each of the weld marks on the original hinge, so that all of the weld is removed during the drilling.