chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Bezel Replacement|Page 9363 > < Bezel Replacement|Page 9361
Page 4
background image

1. Remove the trim panel from the door by completing the following steps:

1. Using the J 38778, carefully pry the retainer from the door.
2. Pull upward in order to release the extension from the trim panel.

2. Remover the retainer from the extension.

Installation Procedure

1. Install the retainer to the extension.
2. Install the extension to the door by completing the following steps:

1. Insert the extension onto the trim panel.
2. Align the retainer into the hole in the door.
3. Push the extension until the retainer seats.

Bezel Replacement|Page 9363 > < Bezel Replacement|Page 9361