chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Bezel Replacement|Page 9366 > < Bezel Replacement|Page 9364
Page 3
background image

1. Remove the trim panel.
2. Remove the water deflector.

1. Pull the waterproof sealing tape from the deflector.
2. Using a flat-blade tool, break the bond between the sealer and the door.

Installation Procedure

1. Using waterproof tape or 3M(R) 777 (or equivalent), install the water deflector to the door.
2. Install the trim panel to the door.

Front Side Door Trim Panel Replacement

Front Side Door Trim Panel Replacement

Tools Required

 J 38778 Trim Panel Remover

Removal Procedure

1. Remove the door handle bezel.
2. Remove the window regulator handle, as necessary.
3. Disconnect the power accessory switch mounting panel wiring connector, as necessary.
4. Remove the trim panel upper extension.

Bezel Replacement|Page 9366 > < Bezel Replacement|Page 9364