C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
3. Pull the rear window upper garnish molding downward while performing the previous step.
Installation Procedure
1. Install the rear window upper garnish molding to the rear body panel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retainer screws, if equipped.
Tighten the rear window upper garnish molding screws to 2 N.m (18 lb in).
Trim Panel Replacement - Upper Extension
TOOLS REQUIRED
J 38778 Trim Panel Remover
REMOVAL PROCEDURE
1. Remove the trim panel from the door by completing the following steps:
1.1. Using the J 38778, carefully pry the retainer from the door.
1.2. Pull upward in order to release the extension from the trim panel.
2. Remover the retainer from the extension.
INSTALLATION PROCEDURE
