C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Lubricate the caliper and the steering knuckle, or support, sliding surfaces and the spring with Shell Aeroshell(R) #5 or the equivalent.
2. Place the new pad in a vise.
3. Compress the vise as needed to obtain a secure fit between the outer brake pad and the caliper.
4. Install the outer brake pad (3) onto the caliper (1).
^
If it is necessary use a C-clamp to install the pad onto the caliper.
^
Do not allow the C-clamp to come into contact with the lining.
^
Insert a used brake pad between the C-clamp and the new brake lining.