C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
8. Remove the caliper lock mounting bolt (2).
9. Remove the support key (3) and the spring (4).
10. Drive out the support key using a brass punch and a hammer.
11. Remove the caliper assembly (1).
12. Inspect the inside of the caliper assembly for signs of fluid leakage. Refer to Brake Caliper Overhaul - Front if any leakage is detected.
13. Use a wire brush to remove any corrosion from the machined surfaces of the anchor plate and the caliper.
Installation Procedure
1. Lubricate the caliper and the anchor plate sliding surfaces with Shell Aeroshell(R) Grade 5 lubricant or equivalent.
Important: Do not use NEVER SEIZE type products on the caliper V-ways and/or anchor plate guide way surfaces.
