C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
2. Install the park brake drum to transmission yoke bolts.
Tighten the bolts to 37 Nm (27 ft. lbs.).
3. Remove the tape from the bearing cups on the universal joint.
4. Align the front propeller shaft to the reference marks on the transmission yoke.
5. Install the front propeller shaft to the transmission yoke.
6. Install the universal joint bearing retainers and the bolts to the transmission yoke.
Tighten the bolts to 37 Nm (27 ft. lbs.).
7. Align the center bearing to the reference marks on the crossmember (2).
8. Install the bolts (3), washers, and nuts (1) to the center bearing (5).
Tighten the bolts to 40 Nm (30 ft. lbs.).
9. Adjust the park brake cable.
10. Lower the vehicle.
