C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement
Removal Procedure
1. Disconnect both the battery negative cables from the batteries.
2. Remove the cylinder head from the engine block.
3. Remove the valve lifter retainer and bolt from the engine block.
4. Remove the valve lifter guide from the engine block.
Important: Some engines will have both standard and 254 mm (0.01 inch) oversize valve lifters. The oversize valve lifter will have a "10" etched on
the cast pad adjacent to the valve lifter bore and on the top rail of the cylinder case above the valve lifter.
5. Remove the valve lifters from the engine block.
6. Place the valve lifters, valve lifter guides, and retainer and bolt in a organizer rack.
Installation Procedure
