C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Engine Block Heater: Service and Repair
Coolant Heater Cord Replacement
Coolant Heater Cord Replacement
Removal Procedure
1. If equipped with a 8.1 L engine, cut the engine block heater cord tie strap.
2. Remove the block heater cord clip bolt.
3. Disconnect the engine block heater cord connector.
4. Remove the engine block heater cord.
Installation Procedure
1. Install the engine block heater cord.
2. Connect the engine block heater cord connector.
Notice: Refer to Fastener Notice in Service Precautions.
