C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
2. Lightly tap the crankshaft balancer onto the crankshaft.
Notice: Refer to Fastener Notice in Service Precautions.
Important: When installing the crankshaft balancer bolt and washer, make sure that the curved part of the washer is pointed away from the engine.
3. Install the crankshaft balancer bolt and washer to the crankshaft.
Tighten the bolt to 270 Nm (200 ft. lbs.).
4. Install the crankshaft pulley to the crankshaft balancer.
5. Install the crankshaft pulley bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
6. Install the lower fan shroud to the radiator.
7. Lower the vehicle.
8. Install the drive belt on the drive pulleys.
