C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
2. Install the drive belt idler pulley bolt.
Tighten the bolt to 50 Nm (37 ft. lbs.).
3. Install the idler pulley to the auxiliary generator bracket (for vehicles equipped with the auxiliary generator option).
Tighten the bolt to 83 Nm (61 ft. lbs.).
4. Install the A/C idler pulley to the air conditioning compressor idler pulley bracket (non A/C only).
Tighten the bolt to 83 Nm (61 ft. lbs.).
5. Install the drive belt on the drive pulleys.
6. Install the upper radiator shroud on the radiator.
