C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
2. Apply a 2 mm (3/32 inch) bead of gasket maker GM P/N 1052357 to the engine front cover.
3. Apply a 5 mm (3/16 inch) bead of RTV sealant GM P/N 12345739 to the engine front cover sealing surface that mates with oil pan.
4. Install the engine front cover to the engine block.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the water pump to the engine block.
Important: Check the marks on the fuel line clips made during removal. Ensure that the fuel line clip are re-installed on the proper studs.
6. Install the engine front cover mounting bolts.
Tighten the bolts and studs to 45 Nm (33 ft. lbs.).
7. Install the bolts from the oil pan to the front cover.
Tighten the oil pan bolts to 10 Nm (89 inch lbs.).
